Carbon steel piping provides safety and durability. Because it is shock resistant and not affected by harsh environmental conditions like pressure or extreme weather, it is an ideal material for structural applications.

The incredible strength of carbon steel means that carbon steel pipe can be made thinner and with less material while still being able to transport high volumes. This makes carbon steel piping a cost-effective material. Not only can less of it be used, but carbon steel is also recyclable, making it both environmentally-friendly and cost-effective.

Because it’s easy to manufacture, carbon steel piping is a versatile material. We can make it in a variety of thicknesses and dimensions. It’s also easy to cut and bent to fit wherever it's needed. Its also easily connected to joints, valves, and other pipe fittings.

Carbon Tube and galvanized pipe

1. The production process is different

Carbon steel pipe is made of steel ingot or solid round steel perforated to form wool tube, then hot and cold rolling and cold drawing. Carbon steel pipe has the key position in domestic steel pipe field.

Galvanized pipes use hot dip galvanizing. Balance of galvanized steel pipes Check the balance of galvanized steel pipes. The steel tube sample was impregnated five times in copper sulfate solution without turning red.

2. Different materials are used

Carbon steel pipe is made of 10, 30 and 45 fine carbon junction steel 16Mn, 5MnV and other low alloy structural steel or 40Cr, 45Mn2 and 40MnB alloy steel hot and cold rolling. 10, 20 low carbon steel production of seamless pipe key used in fluid transport pipe.

Galvanized pipe is to combine the molten metal with the iron matrix to form an alloy layer, so that the matrix and the coating are combined. Hot dip galvanizing is to acid wash the steel pipe first, in order to eliminate the iron oxide on the surface of the steel pipe, after washing, it is cleaned by ammonium chloride or zinc chloride water or ammonium chloride and zinc chloride mixed liquid tank, and then put into the hot dip plating tank.

3. Different technical parameters

According to statistics, the existing domestic carbon steel pipe manufacturing companies more than 240, more than 250 sets of units, annual capacity of more than 4.5 million tons.

Based on the analysis of diameter, 35% are smaller than φ76, and 25% are smaller than φ159 to 650. By variety analysis, common purpose pipe 1.9 million tons, accounting for 54%. 760,000 tons of oil steel pipe, accounting for 5.7%, 150,000 tons of hydraulic prop and precision pipe, 4.3 percent of stainless pipe bearing pipe and automobile pipe 50,000 tons, accounting for 1.4%.